Delete readings


In this article, we will explain how to delete readings on the EMS platform

Contents of this article:


This tab allows you to analyse the iserted valued on the gateway. Using delete readings you can check the sending frequency of you data, analyse the data and detect or delete wrong values. Learn how to identify and delete peaks on the EMS platform. 


How to delete readings

In order to delete readings follow these steps:

  1. Log in as a superadmin or Admin into your account.
  2. Go to "Settings" and click on "Gateways"

  3. Select your gateway and click on the "Delete Readings" tab.

  4.  Choose the Device which you want to delete the readings and then select the Parameter for which you want to delete data. Under "Available frequencies" dropdown, select the frequency to display: basic data (for example, 402 parameter) or the discrete one (for example, 40201). Please note that only the readings that were sent to the gateway will appear, so any data calculated by the plaftorm will not be listed here. If you are sending basic data (like the 402 parameter), you will only be available to delete basic data. If you are sending directly 15 min electrical energy (the interval data 40201), you will be only available to delete the data for this frequency. 
  5. Select also a condition if you want (as a filter) and a time range. Press on "View" button. 
  6. Now, you will see all the data corresponding to the selected time range.
  7. Select all readings you want to delete and press "Delete". If you want to delete a high number of readings, change the reading items to view in lists.

To keep in mind

  • Parameters will automatically be recalculated after deleting any reading.
  • It's not allowed to delete more than 6 months of data at once
  • You can choose all readings from a page by clicking on the top checker from reading table.




Was this article helpful?