Schneider - Meters & Sensors

Follow
List of Schneider meters/sensors compatible with DEXGate or DEXGate 2:
  1. PM3250
  2. PM3255
  3. PM500
  4. PM5100
  5. PM5300
  6. PM5500
  7. Schneider PM710
  8. Schneider PM800
  9. Schneider PM9C
  10. SIM Series

1. PM3250

 


Manufacturer:
 Schneider
Product and variants: PM3250
Description: Panel three-phase electrical analyzer
Measures: Electrical parameters
Compatible using: DEXGate2
 
(check attached file: PM3200_series_-_User_Manual)
 

2.  PM3255

 


 

Manufacturer: Schneider
Product and variants: PM3255
Description: Panel three-phase electrical analyser
Measures: Electrical parameters
Compatible using: DEXGate2
 
(check attached file: PM3200_series_-_User_Manual)
 

3. PM500


Manufacturer: Schneider
Product and variants: PM500
Description: Panel three-phase electrical analyzer
Measures: Electrical parameters
Compatible using: DEXGate2

(check attached file: PM500-userGuide)

4. PM5100



Manufacturer: Schneider
Product and variants: PM5100
Description: Panel three-phase electrical analyzer
Measures: Electrical parameters
Compatible using: DEXGate2

(check attached file: PM5100_User_Guide)

5. PM5300

 


 

Manufacturer: Schneider
Product and variants: PM5300
Description: Panel three-phase electrical analyzer
Measures: Electrical parameters
Compatible using: DEXGate2
 
(check attached file: PM5300)
 

6. PM5500

 


 

Manufacturer: Schneider
Product and variants: PM5500
Description: Panel three-phase electrical analyser
Measures: Electrical parameters
Compatible using: DEXGate2
 
(check attached file: PM5500_User_Guide)
 

7. Schneider PM710


Manufacturer: Schneider
Product and variants: PM710
Description: Panel three-phase electrical analyzer
Measures: Electrical parameters
Compatible using: DEXGate, EGX300

(check attached file: 710)

8. Schneider PM800


Manufacturer: Schneider
Product and variants: PM800
Description: Panel three-phase electrical analyser
Measures: Electrical parameters
Compatible using: DEXGate (It is necessary to enable Floating point registers), EGX300

(check attached files: pm800 and PM8xx_Enable_Float_Registers_from_Display)

9. Schneider PM9C



Manufacturer: Schneider
Product and variants: PM9C
Description: DIN-rail three-phase energy analyser
Measures: Electrical parameters
Compatible using: DEXGate, Schneider EGX300, Satel Owasys

Schneider PM9C quick install guide

 

To follow this guide you will need:

  • 1 x DEXGate
  • 1 x PM9C
  • 1 x USB-RS485 addapter
  • 1 x Computer
  • 1 x Ethernet Cable

Installation:

  1. Install the current transformers following the following diagram:
  2. Connect the orange usb cable to the D1 B/B' connector, the yellow cable to the D0 A/A' connector and the black cable to the 0V connector:
    Circutor cvm mini rs485
  3. Power up the meter
  4. Access to set up menu (pass: 0010)
  5. Reset meter values
  6. Select connection scheme
  7. Configure current transformers factor
  8. Verify bus speed (by default: 19200)
  9. Configure ModBus address
  10. Power up the DEXGate
  11. Connect the USB-RS485 cable to the DEXGate
  12. Connect the Ethernet cable to your computer and the ETH1 port of the DEXGate
  13. Access the web administration interface of the DEXGate (http://172.16.0.1)
  14. Login (the default username and password are admin/admin)
  15. Go to the "Bridge Configuration" section
  16. Edit the line:
    devices.schneider-pm9c=
    to look like this:
    devices.schneider-pm9c=10
  17. where "10" indicates ModBus meter adress
  18. Save
  19. Restart the modbus bridge or the DEXGate
  20. You're done!

(check attached file: pm9c)

10. SIM Series



Manufacturer: Schneider
Product and variants: SIM Series. Smart Interface Module. 
Description: Smart Interface Modules provide local physical interfaces with buildings pulse output meters (water, gas, electricity, ...) and analog inputs.
Measures: pulses and analog inputs.
Compatible using: DEXGate2
 

(check attached file: SIM_series)

0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.