Socomec - Meters & Sensors

This article describes Socomec meters/sensors compatible with DEXGate or DEXGate 2. The article is divided into the following sections:

• COUNTIS ECi3
• Digiware i30
• Digiware i33
• Digiware i60
• Digiware U10
• Socomec Countis E30
• Socomec Countis E40
• Socomec Countis E50
• Socomec Countis E60
• Socomec Countis ECi2
• Socomec Diris A10
  • Socomec Diris A10 - Quick Start Guide
• Socomec Diris A20
• Socomec Diris A40

 Manufacturer's website: www.socomec.com

COUNTIS ECi3

Manufacturer: Socomec
Product and variants: Countis ECi3
Description: Pulse acumulator with 7 pulse inputs
Measures: Digital pulses
Compatible using: DEXGate (Using USB COM-PRO or  USB-COMi-M Modbus conversors).
Compatible using: DEXGate2 Only if RS-485 bus impedance is well-adjusted (120ohm) or a/several Digiware device/s are present in the bus (see this article about RS485 bus)

(check attached fle: COUNTIS_ECi3)

Digiware i30

Manufacturer: Socomec
Product and variants: Digiware i30
Description: Three channels current module for DIRIS Digiware modular monitoring system. For three single-phase or one three-phase.
Measures: Electrical parameters
Compatible using: DEXGate2
Commments: Requires C31 or D50 for communication, and U10 for voltage measures. 
Digiware connection example:


 

 

(check the attached files: catalogue_dirisdigiware-gb; diris_digiware_EN; Quick_Start_diris_digiware)

Digiware i33

Manufacturer: Socomec
Product and variants: Digiware i33
Description: Three channels current module for DIRIS Digiware modular monitoring system. For three single-phase or one three-phase.
In addition to i30 capabilities, i33 adds THDi, P, Q, S, and PF per phase.
Measures: Electrical parameters
Compatible using: DEXGate2
Commments: Requires C31 or D50 for communication, and U10 for voltage measures. 
Digiware connection example:


(check the attached files: catalogue_dirisdigiware-gb; diris_digiware_EN; Quick_Start_diris_digiware)

Digiware i60

Manufacturer: Socomec
Product and variants: Digiware i60
Description: Six channels current module for DIRIS Digiware modular monitoring system. For six single-phase or two three-phase.
Measures: Electrical parameters
Compatible using: DEXGate2
Commments: Requires C31 or D50 for communication, and U10 for voltage measures. 
Digiware connection example:


(check the attached files: catalogue_dirisdigiware-gb; diris_digiware_EN; Quick_Start_diris_digiware)

Digiware U10

Manufacturer: Socomec
Product and variants: Digiware u10
Description: Voltage Module for DIRIS Digiware modular monitoring system. 
Measures: Electrical parameters
Compatible using: DEXGate2
Commments: Requires C31 or D50 for communication, and i30 or i60 for current measures. 
Digiware connection example:

Socomec Countis E30

Manufacturer: Socomec
Product and variants: Countis E30
Description: Three-phase DIN-rail energy meter
Measures: Electrical parameters
Compatible using: DEXGate (Using USB COM-PRO or  USB-COMi-M Modbus conversors)

Compatible using: DEXGate2 Only if RS-485 bus impedance is well-adjusted (120ohm) or a/several Digiware device/s are present in the bus (see this article about RS485 bus)

Comments: This device supports direct currents up to 100A

 

Socomec Countis E40
 

Manufacturer: Socomec
Product and variants: Countis E40
Description: Three-phase DIN-rail energy meter
Measures: Electrical parameters
Compatible using: DEXGate (Using USB COM-PRO or  USB-COMi-M Modbus conversors)

Compatible using: DEXGate2 Only if RS-485 bus impedance is well-adjusted (120ohm) or a/several Digiware device/s are present in the bus (see this article about RS485 bus)

 

Socomec Countis E50

Manufacturer: Socomec
Product and variants: Countis E50
Description: Three-phase panel energy meter
Measures: Electrical parameters
Compatible using: DEXGate (Using USB COM-PRO or  USB-COMi-M Modbus conversors)

Compatible using: DEXGate2 Only if RS-485 bus impedance is well-adjusted (120ohm) or a/several Digiware device/s are present in the bus (see this article about RS485 bus)

 

Socomec Countis E60 

Manufacturer: Socomec
Product and variants: Countis E60
Description: Three-phase DIN-rail energy meter
Measures: Electrical parameters
Compatible using: DEXGate (Using USB COM-PRO or  USB-COMi-M Modbus conversors)

Compatible using: DEXGate2 Only if RS-485 bus impedance is well-adjusted (120ohm) or a/several Digiware device/s are present in the bus (see this article about RS485 bus)

Comments: This device supports direct currents up to 100A

 

Socomec Countis ECi2

Manufacturer: Socomec
Product and variants: Countis ECi2
Description: Pulse acumulator with 7 pulse inputs
Measures: Digital pulses
Compatible using: DEXGate (Using USB COM-PRO or  USB-COMi-M Modbus conversors).

Compatible using: DEXGate2 Only if RS-485 bus impedance is well-adjusted (120ohm) or a/several Digiware device/s are present in the bus (see this article about RS485 bus)

 

Socomec Diris A10

Manufacturer: Socomec
Product and variants: Diris A10
Description: Three-phase DIN-rail energy analyzer
Measures: Electrical parameters
Compatible using: DEXGate (Using USB COM-PRO or  USB-COMi-M Modbus conversors)

Compatible using: DEXGate2 Only if RS-485 bus impedance is well-adjusted (120ohm) or a/several Digiware device/s are present in the bus (see this article about RS485 bus)

Comments: This device requires the resistors in the first and last device of the rs485 bus

 

Socomec Diris A10 - Quick Start Guide

To follow this guide you will need:

• 1 x DEXGate
• 1 x DIRIS A-10
• 1 x USB-RS485 addapter
• 1 x Computer
• 1 x Ethernet Cable

Installation:

1. Install the current transformers following the following diagram:
   
   
2. Connect the orange usb cable to the 17 connector, the yellow cable to the 15 connector and the black cable to the 13 connector:
   
   
3. Power up the meter
4. Access to set up menu (pass code: 100)
5. Select connection type and Configure current transformers factor
6. Reset meter values
7. Configure ModBus address
8. Power up the DEXGate
9. Connect the USB-RS485 cable to the DEXGate
10. Connect the Ethernet cable to your computer and the ETH1 port of the DEXGate
11. Access the web administration interface of the DEXGate (http://172.16.0.1)
12. Login (the default username and password are admin/admin)
13. Go to the "Bridge Configuration" section
14. Edit the line:
    
    devices.socomec-a10=
    
    to look like this:
    
    devices.socomec-a10=10
15. where "10" indicates ModBus meter adress
16. Save
17. Restart the modbus bridge or the DEXGate
18. You're done!

Socomec Diris A20

Manufacturer: Socomec
Product and variants: Diris A20
Description: Three-phase panel energy analyzer
Measures: Electrical parameters
Compatible using: DEXGate (Using USB COM-PRO or  USB-COMi-M Modbus conversors)

Compatible using: DEXGate2 Only if RS-485 bus impedance is well-adjusted (120ohm) or a/several Digiware device/s are present in the bus (see this article about RS485 bus)

Comments: This device requires the resistors in the first and last device of the rs485 bus

 

Socomec Diris A40

Manufacturer: Socomec
Product and variants: Diris A40
Description: Three-phase panel energy analyzer
Measures: Electrical parameters
Compatible using: DEXGate (Using USB COM-PRO or  USB-COMi-M Modbus conversors)

Compatible using: DEXGate2 Only if RS-485 bus impedance is well-adjusted (120ohm) or a/several Digiware device/s are present in the bus (see this article about RS485 bus)

Comments: This device requires the resistors in the first and last device of the rs485 bus