In this article we are going to learn how to use the consumption feature in the platform.
- Available frequencies
- Available energy sources
- How does it work?
- Data Display
- Exporting data
- Tips and tricks
The Consumption feature allows us to visualize the evolution of our installation, the actual consumption and the potential inefficiencies through charts and tables.
The available frequencies in this screen are the ones that you have configured in the Preferences section of the Platform (Settings --> Preferences).
It can go from 5min to monthly.
Available energy sources
The available energy sources by default are electricity, Gas and Water. However, these are all the available sources with the consumption parameter associated:
- Electricity - 402
- Gas - 420
- Water - 901
- Thermal (heating) - 802
- Thermal (cooling) - 810
- Exported energy - 452
- Gas (Vol) - 420
- Gas (NVol) - 419
- Compressed Air Volume - 435
- Liquefied natural gas energy (LNG) - 471
- Biomass - 497
Remember that you can easily activate new Energy Sources going to Settings -> Preferences.
In order to see data in the Consumption screen you need a few things first:
- To send data to the platform
- To accept the devices and datapoints generated when the data gets into the platform
- To assign those devices to their corresponding location
Remember that you can only visualize energy data in this screen.
To visualize data of other types of parameters, you should go to Advanced Analytics.
How does it work?
1. Select the energy source that we want to analyze.
2. Select the devices or groups that we want to analyze.
3. Select the dates you want to visualize.
4. Choose the data frequency.
5. Click update.
If we want to normalize consumption we can apply ratios.
DEXMA offers the possibility of changing the type of chart. There are the following available:
Through the summary table we can check in a detailed way the most significant data of the chosen devices. In order to compare which device is consuming more. This is very helpful in comparing similar devices.
The data from the screen can be exported in 3 different ways:
- As an Excel File
- As a picture (only in the case of the chart)
- As a Custom report block, both graph and table. For more information, click here.
Tips and tricks
2. Add all the available devices
If we write * in devices all the devices are added.
If we do the same after "floor" for example, as in this case, all the devices including "floor" in their name will be added.
3. Move the time coordinate
We can use the arrows place above the graph for moving in the time line. They indicate the previous and following period.
4. Consumption download
The consumption feature can be used as well for downloading data from a device in a chosen period of time.