En este artículo, se mencionan todos los medidores compatibles con DEXGate y DEXGate 2. El artículo se divide en los siguientes apartados:
Lista de medidores compatibles - DEXGate 2
El DEXGate2 es compatible con los siguientes dispositivos:
- Modbus-RTU/Modbus-TCP (v6.2.6):
- Accuenergy
- Ako
- Atec
- Brainchild
- Carlo Gavazzi
- Circutor
- Diehl
- Eastron
- El Component
- Electrex
- Enerdis
- Entes
- General Electric
- Janitza
- LEM
- Micronics
- Northern Design
- Lovato
- Lumel
- Panasonic
- Pilot
- Produal
- Schneider
- Selec
- Siemens
- Socomec
- Diris A10 (ver nota)
- Diris A20 (ver nota)
- Diris A40 (ver nota)
- Countis E30 (ver nota)
- Countis E40 (ver nota)
- Countis E50 (ver nota)
- Countis E60 (ver nota)
- Countis ECi2 (ver nota)
- Countis ECi3 (ver nota)
- Digiware I30
- Digiware I33
- Digiware I60
- Digiware U10
- Step
- 4Noks:
- Custom:
- Dispositivos personalizados mediante plantillas
Si quieres usar algún dispositivo que no aparece en la lista por favor contacta con tu proveedor de soporte.
Nota: Compatible con DEXGate2 solo si la impedancia del BUS RS-485 está bien ajustada (120ohm) o están presentes en el BUS uno o varios Dispositivos Digiware (ver el siguiente artículo referente al BUS RS-485 )
Lista de medidores compatibles - DEXGate
El DEXGate es compatible con los siguientes dispositivos:
- Modbus-RTU/Modbus-TCP(v5.0.0):
- Accuenergy
- Ako
- Atec
- Brainchild
- Carlo Gavazzi
- Circutor
- Eastron
- Electrex
- Enerdis
- Entes
- General Electric
- Janitza
- LEM
- Lovato
- Lumel
- Panasonic
- Pilot
- Produal
- Schneider
- Siemens
- Socomec
- Diris A10 (ver nota)
- Diris A20 (ver nota)
- Diris A40 (ver nota)
- Countis E30 (ver nota)
- Countis E40 (ver nota)
- Countis E50 (ver nota)
- Countis E60 (ver nota)
- Countis ECi2 (ver nota)
- Digiware I30
- Digiware I33
- Digiware I60
- Digiware U10
- Step
- 4Noks:
- ZED-THI-M
- ZED-THL-M
- ZED-TIDCI-M
- ZED-TID-M
- ZC-GW-485-EM
- ZC-GW-ETH-EM
- ZC-GW-ETH-EM / ZC-GW-ETH-EPM
- ZR-BR-485-EM
- Custom:
- Dispositivos personalizados mediante plantillas
- 4Noks (v4.4.3):
- ZC-GW-USB-EM
- ZR-HMETER.D-M
- ZR-HMETER.W-M
- ZR-PLUG-EU-M
- ZED-TCM-M
- ZED-THI-M
- ZED-THL-M
- ZED-3IAC-M
- ZR-TIDCI-EM
- ZR-TIDCI-OPT1
- ZED-TIDCI-M
- ZED-TID-M
- ZR-TID-EM
- ZR-TIREL2-EM
- Contadores IEC 870-5-102 (protocolo de Red Eléctrica de España)
Si quieres usar algún dispositivo que no aparece en la lista por favor contacta con tu proveedor de soporte.
Nota: Compatible con DEXGate usando el conversor Modbus USB-COMi-M o USB COM-PRO